From 3027097d9fdd7f06bf243a6323265a5ff73258d8 Mon Sep 17 00:00:00 2001
From: Navan Chauhan <navanchauhan@gmail.com>
Date: Sat, 17 Feb 2024 19:13:55 -0700
Subject: rename

---
 MTBCanHolder/CanHolder.scad | 162 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 162 insertions(+)
 create mode 100644 MTBCanHolder/CanHolder.scad

(limited to 'MTBCanHolder/CanHolder.scad')

diff --git a/MTBCanHolder/CanHolder.scad b/MTBCanHolder/CanHolder.scad
new file mode 100644
index 0000000..08f64a7
--- /dev/null
+++ b/MTBCanHolder/CanHolder.scad
@@ -0,0 +1,162 @@
+$fn = 100;
+
+/*
+Can holder MTB
+
+Tested w/ Giant Talon 2 (2022) and Marin Drift Zone 1
+
+Infill: 40%
+*/
+
+/*
+
+Type: can_height_offset / base_width / base_depth_offset
+
+Normal 12oz can: 122 / 20 / 0
+Keystone 12oz: 133
+Yerba Mate: 15.5 oz
+Red Bull: 8.4oz: 136 / 15 / -6.5
+
+*/
+
+can_height_offset = 122;
+base_width = 20;
+base_depth_offset = 0; // For Non-12oz Cans
+
+can_height = can_height_offset + 8; // 12.cm
+base_depth = 10;                    // 1cm
+screw_small_depth = 3;
+screw_thread_diameter = 9;
+bolt_head_diameter = 12;                        // 6mm for M5 bolt
+dist_between_holes = 55;                        // 2.14inch / 64mm
+hole_offset = 25;                               // 2cm from origin
+bottom_lip_height = 4.5;                        // 4.5mm 2cm (1cm + xyz)
+bottom_lip_thickness = 5;                       // 5mm
+bottom_lip_base = 5;                            // 10mm
+bottom_lip_extrusion = 12.5 + base_depth - 6.5; // 10.5mm
+upper_lip_base = 5;
+upper_lip_thickness = 23 + base_depth - 6.5; // height basically
+upper_pushness_thickness = 4;
+upper_pusher_base = 15;
+upper_can_hook_height = 10;
+upper_can_hook_base = 5;
+upper_can_hook_width = 5;
+upper_hook_radius = 10;
+upper_lip_difference = 2.50;
+
+/*
+translate([-20,120,base_depth-2]) {
+rotate([64,0,20]){
+color([1,0,0]) {
+import("soda_can.stl");
+}
+}
+}
+*/
+
+module
+pieSlice(a, r, h)
+{
+    // a:angle, r:radius, h:height
+    rotate_extrude(angle = a) square([ r, h ]);
+}
+
+// Base w/ Screw Holes
+linear_extrude(base_depth)
+{
+    difference()
+    {
+        difference()
+        {
+            square([ base_width, can_height ]);
+            translate([ base_width / 2, hole_offset, 0 ])
+            {
+                circle(d = bolt_head_diameter);
+                translate([ 0, (bolt_head_diameter) + dist_between_holes, 0 ])
+                {
+                    circle(d = bolt_head_diameter);
+                }
+            }
+        }
+    }
+}
+
+// Screw Hole Padding
+linear_extrude(screw_small_depth)
+{
+    translate([ base_width / 2, hole_offset, 0 ])
+    {
+        difference()
+        {
+            circle(d = bolt_head_diameter);
+            circle(d = screw_thread_diameter);
+        }
+        translate([ 0, (bolt_head_diameter) + dist_between_holes, 0 ])
+        {
+            difference()
+            {
+                circle(d = bolt_head_diameter);
+                circle(d = screw_thread_diameter);
+            }
+        }
+    }
+}
+
+// Upper Hook
+difference()
+{
+    linear_extrude(upper_lip_thickness)
+    {
+        translate([ 0, -upper_lip_base, 0 ])
+        {
+            square([ base_width, upper_lip_base ]);
+        }
+    }
+
+    translate([ -2.5, -upper_lip_difference, base_depth / 2.5 ])
+    {
+        linear_extrude(upper_lip_thickness - 10 - (base_depth / 2.5))
+        {
+            square([ base_width + 5, upper_lip_difference ]);
+        }
+    }
+}
+
+// Upper Hook Push Lip
+translate([ 0, 0, (upper_lip_thickness * 7 / 8) - upper_pushness_thickness ])
+{
+    linear_extrude(upper_pushness_thickness)
+    {
+        translate([ 0, -upper_pusher_base - upper_lip_base, 0 ])
+        {
+            square([ base_width, upper_pusher_base ]);
+        }
+    }
+}
+
+// Upper Hook - Curved Hook
+translate([ base_width, 0, upper_lip_thickness - 10 ])
+{
+    rotate([ 0, -90, 0 ])
+    {
+        pieSlice(90 + 25, upper_hook_radius, base_width);
+    }
+}
+
+// Bottom Lip
+
+linear_extrude((bottom_lip_extrusion) + bottom_lip_thickness)
+{
+    translate([ 0, can_height, 0 ])
+    {
+        square([ base_width, bottom_lip_base ]);
+    }
+}
+
+translate([ 0, can_height - bottom_lip_height, (bottom_lip_extrusion) ])
+{
+    linear_extrude(bottom_lip_thickness)
+    {
+        square([ base_width, bottom_lip_height ]);
+    }
+}
\ No newline at end of file
-- 
cgit v1.2.3