rename

1 files changed, 0 insertions, 162 deletions

diff --git a/MTBCanHolder/12ozCanHolder.scad b/MTBCanHolder/12ozCanHolder.scad
deleted file mode 100644
index 08f64a7..0000000
--- a/MTBCanHolder/12ozCanHolder.scad
+++ /dev/null
@@ -1,162 +0,0 @@
-$fn = 100;
-
-/*
-Can holder MTB
-
-Tested w/ Giant Talon 2 (2022) and Marin Drift Zone 1
-
-Infill: 40%
-*/
-
-/*
-
-Type: can_height_offset / base_width / base_depth_offset
-
-Normal 12oz can: 122 / 20 / 0
-Keystone 12oz: 133
-Yerba Mate: 15.5 oz
-Red Bull: 8.4oz: 136 / 15 / -6.5
-
-*/
-
-can_height_offset = 122;
-base_width = 20;
-base_depth_offset = 0; // For Non-12oz Cans
-
-can_height = can_height_offset + 8; // 12.cm
-base_depth = 10;                    // 1cm
-screw_small_depth = 3;
-screw_thread_diameter = 9;
-bolt_head_diameter = 12;                        // 6mm for M5 bolt
-dist_between_holes = 55;                        // 2.14inch / 64mm
-hole_offset = 25;                               // 2cm from origin
-bottom_lip_height = 4.5;                        // 4.5mm 2cm (1cm + xyz)
-bottom_lip_thickness = 5;                       // 5mm
-bottom_lip_base = 5;                            // 10mm
-bottom_lip_extrusion = 12.5 + base_depth - 6.5; // 10.5mm
-upper_lip_base = 5;
-upper_lip_thickness = 23 + base_depth - 6.5; // height basically
-upper_pushness_thickness = 4;
-upper_pusher_base = 15;
-upper_can_hook_height = 10;
-upper_can_hook_base = 5;
-upper_can_hook_width = 5;
-upper_hook_radius = 10;
-upper_lip_difference = 2.50;
-
-/*
-translate([-20,120,base_depth-2]) {
-rotate([64,0,20]){
-color([1,0,0]) {
-import("soda_can.stl");
-}
-}
-}
-*/
-
-module
-pieSlice(a, r, h)
-{
-    // a:angle, r:radius, h:height
-    rotate_extrude(angle = a) square([ r, h ]);
-}
-
-// Base w/ Screw Holes
-linear_extrude(base_depth)
-{
-    difference()
-    {
-        difference()
-        {
-            square([ base_width, can_height ]);
-            translate([ base_width / 2, hole_offset, 0 ])
-            {
-                circle(d = bolt_head_diameter);
-                translate([ 0, (bolt_head_diameter) + dist_between_holes, 0 ])
-                {
-                    circle(d = bolt_head_diameter);
-                }
-            }
-        }
-    }
-}
-
-// Screw Hole Padding
-linear_extrude(screw_small_depth)
-{
-    translate([ base_width / 2, hole_offset, 0 ])
-    {
-        difference()
-        {
-            circle(d = bolt_head_diameter);
-            circle(d = screw_thread_diameter);
-        }
-        translate([ 0, (bolt_head_diameter) + dist_between_holes, 0 ])
-        {
-            difference()
-            {
-                circle(d = bolt_head_diameter);
-                circle(d = screw_thread_diameter);
-            }
-        }
-    }
-}
-
-// Upper Hook
-difference()
-{
-    linear_extrude(upper_lip_thickness)
-    {
-        translate([ 0, -upper_lip_base, 0 ])
-        {
-            square([ base_width, upper_lip_base ]);
-        }
-    }
-
-    translate([ -2.5, -upper_lip_difference, base_depth / 2.5 ])
-    {
-        linear_extrude(upper_lip_thickness - 10 - (base_depth / 2.5))
-        {
-            square([ base_width + 5, upper_lip_difference ]);
-        }
-    }
-}
-
-// Upper Hook Push Lip
-translate([ 0, 0, (upper_lip_thickness * 7 / 8) - upper_pushness_thickness ])
-{
-    linear_extrude(upper_pushness_thickness)
-    {
-        translate([ 0, -upper_pusher_base - upper_lip_base, 0 ])
-        {
-            square([ base_width, upper_pusher_base ]);
-        }
-    }
-}
-
-// Upper Hook - Curved Hook
-translate([ base_width, 0, upper_lip_thickness - 10 ])
-{
-    rotate([ 0, -90, 0 ])
-    {
-        pieSlice(90 + 25, upper_hook_radius, base_width);
-    }
-}
-
-// Bottom Lip
-
-linear_extrude((bottom_lip_extrusion) + bottom_lip_thickness)
-{
-    translate([ 0, can_height, 0 ])
-    {
-        square([ base_width, bottom_lip_base ]);
-    }
-}
-
-translate([ 0, can_height - bottom_lip_height, (bottom_lip_extrusion) ])
-{
-    linear_extrude(bottom_lip_thickness)
-    {
-        square([ base_width, bottom_lip_height ]);
-    }
-}
\ No newline at end of file