diff options
| -rw-r--r-- | MTBCanHolder/12ozCanHolder.scad | 31 |
1 files changed, 25 insertions, 6 deletions
diff --git a/MTBCanHolder/12ozCanHolder.scad b/MTBCanHolder/12ozCanHolder.scad index eaebe7a..27ec2d5 100644 --- a/MTBCanHolder/12ozCanHolder.scad +++ b/MTBCanHolder/12ozCanHolder.scad @@ -2,16 +2,18 @@ can_height=122 + 10; // 12.cm base_width=20; // 2cm -base_depth=5; // 1cm -bolt_head_diameter=10; //6mm for M5 bolt -dist_between_holes=64; // 2.14inch / 64mm +base_depth=10; // 1cm +screw_small_depth = 3; +screw_thread_diameter = 9; +bolt_head_diameter=12; //6mm for M5 bolt +dist_between_holes=55; // 2.14inch / 64mm hole_offset=25; // 2cm from origin bottom_lip_height=4.5; // 4.5mm 2cm (1cm + xyz) bottom_lip_thickness=5; // 5mm bottom_lip_base=5; // 10mm -bottom_lip_extrusion=17.5; // 10.5mm +bottom_lip_extrusion=12.5 + base_depth; // 10.5mm upper_lip_base=5; -upper_lip_thickness=28; // height basically +upper_lip_thickness=23 + base_depth; // height basically upper_pushness_thickness=3; upper_pusher_base=10; upper_can_hook_height=10; @@ -20,6 +22,7 @@ upper_can_hook_width=5; upper_hook_radius=10; upper_lip_difference=2.50; +/* translate([-20,120,base_depth-2]) { rotate([64,0,20]){ @@ -31,7 +34,7 @@ import("soda_can.stl"); } } - +*/ // Distance from tip to base should 7.5mm // Distance from tip to left face 6 mm @@ -55,6 +58,22 @@ linear_extrude(base_depth) { } } + +linear_extrude(screw_small_depth) { + translate([base_width/2,hole_offset,0]){ + difference() { + circle(d=bolt_head_diameter); + circle(d=screw_thread_diameter); + } + translate([0,(bolt_head_diameter)+dist_between_holes,0]) { + difference() { + circle(d=bolt_head_diameter); + circle(d=screw_thread_diameter); + } + } + } +} + // Upper Lip difference(){ linear_extrude(upper_lip_thickness){ |