v1.0.0

1 files changed, 113 insertions, 103 deletions

diff --git a/MTBCanHolder/12ozCanHolder.scad b/MTBCanHolder/12ozCanHolder.scad
index 7cffd09..08f64a7 100644
--- a/MTBCanHolder/12ozCanHolder.scad
+++ b/MTBCanHolder/12ozCanHolder.scad
@@ -1,152 +1,162 @@
-$fn=100;
+$fn = 100;
 
 /*
 Can holder MTB
 
-Tested w/
+Tested w/ Giant Talon 2 (2022) and Marin Drift Zone 1
 
 Infill: 40%
 */
 
 /*
-Normal 12oz can: 122
+
+Type: can_height_offset / base_width / base_depth_offset
+
+Normal 12oz can: 122 / 20 / 0
 Keystone 12oz: 133
 Yerba Mate: 15.5 oz
-Red Bull: 8.4oz: 136
+Red Bull: 8.4oz: 136 / 15 / -6.5
 
 */
-can_height=136 + 8; // 12.cm
-base_width=15; // 2cm
-base_depth=10; // 1cm
+
+can_height_offset = 122;
+base_width = 20;
+base_depth_offset = 0; // For Non-12oz Cans
+
+can_height = can_height_offset + 8; // 12.cm
+base_depth = 10;                    // 1cm
 screw_small_depth = 3;
 screw_thread_diameter = 9;
-bolt_head_diameter=12; //6mm for M5 bolt
-dist_between_holes=55; // 2.14inch / 64mm
-hole_offset=25; // 2cm from origin
-bottom_lip_height=4.5; // 4.5mm 2cm (1cm + xyz)
-bottom_lip_thickness=5; // 5mm
-bottom_lip_base=5; // 10mm
-bottom_lip_extrusion=12.5 + base_depth; // 10.5mm
-upper_lip_base=5;
-upper_lip_thickness=23 + base_depth; // height basically
-upper_pushness_thickness=4; 
-upper_pusher_base=15;
-upper_can_hook_height=10;
-upper_can_hook_base=5;
-upper_can_hook_width=5;
-upper_hook_radius=10;
-upper_lip_difference=2.50;
+bolt_head_diameter = 12;                        // 6mm for M5 bolt
+dist_between_holes = 55;                        // 2.14inch / 64mm
+hole_offset = 25;                               // 2cm from origin
+bottom_lip_height = 4.5;                        // 4.5mm 2cm (1cm + xyz)
+bottom_lip_thickness = 5;                       // 5mm
+bottom_lip_base = 5;                            // 10mm
+bottom_lip_extrusion = 12.5 + base_depth - 6.5; // 10.5mm
+upper_lip_base = 5;
+upper_lip_thickness = 23 + base_depth - 6.5; // height basically
+upper_pushness_thickness = 4;
+upper_pusher_base = 15;
+upper_can_hook_height = 10;
+upper_can_hook_base = 5;
+upper_can_hook_width = 5;
+upper_hook_radius = 10;
+upper_lip_difference = 2.50;
 
 /*
 translate([-20,120,base_depth-2]) {
-
 rotate([64,0,20]){
-
 color([1,0,0]) {
-
 import("soda_can.stl");
 }
 }
-
 }
 */
 
-
-// Distance from tip to base should 7.5mm
-// Distance from tip to left face 6 mm
-
-module pieSlice(a, r, h){
-  // a:angle, r:radius, h:height
-  rotate_extrude(angle=a) square([r,h]);
-}
-
-linear_extrude(base_depth) {
-    difference() {
-        difference(){
-            square([base_width, can_height]);
-            translate([base_width/2,hole_offset,0]){
-                circle(d=bolt_head_diameter);
-                translate([0,(bolt_head_diameter)+dist_between_holes,0]) {
-                    circle(d=bolt_head_diameter);
+module
+pieSlice(a, r, h)
+{
+    // a:angle, r:radius, h:height
+    rotate_extrude(angle = a) square([ r, h ]);
+}
+
+// Base w/ Screw Holes
+linear_extrude(base_depth)
+{
+    difference()
+    {
+        difference()
+        {
+            square([ base_width, can_height ]);
+            translate([ base_width / 2, hole_offset, 0 ])
+            {
+                circle(d = bolt_head_diameter);
+                translate([ 0, (bolt_head_diameter) + dist_between_holes, 0 ])
+                {
+                    circle(d = bolt_head_diameter);
                 }
             }
         }
     }
 }
 
-
-linear_extrude(screw_small_depth) {
-            translate([base_width/2,hole_offset,0]){
-                difference() {
-                circle(d=bolt_head_diameter);
-                    circle(d=screw_thread_diameter);
-                }
-            translate([0,(bolt_head_diameter)+dist_between_holes,0]) {
-                difference() {
-                    circle(d=bolt_head_diameter);
-                    circle(d=screw_thread_diameter);
-                }
-                }
+// Screw Hole Padding
+linear_extrude(screw_small_depth)
+{
+    translate([ base_width / 2, hole_offset, 0 ])
+    {
+        difference()
+        {
+            circle(d = bolt_head_diameter);
+            circle(d = screw_thread_diameter);
+        }
+        translate([ 0, (bolt_head_diameter) + dist_between_holes, 0 ])
+        {
+            difference()
+            {
+                circle(d = bolt_head_diameter);
+                circle(d = screw_thread_diameter);
             }
+        }
+    }
 }
 
-// Upper Lip
-difference(){
-linear_extrude(upper_lip_thickness){
-translate([0,-upper_lip_base,0]) {
-    square([base_width,upper_lip_base]);
-}
-}
-
-translate([-2.5,-upper_lip_difference,base_depth/2.5]) {
-    linear_extrude(upper_lip_thickness-10-(base_depth/2.5)){
-    square([base_width+5,upper_lip_difference]);
+// Upper Hook
+difference()
+{
+    linear_extrude(upper_lip_thickness)
+    {
+        translate([ 0, -upper_lip_base, 0 ])
+        {
+            square([ base_width, upper_lip_base ]);
+        }
     }
-}
-}
 
-// Upper Lip Pusher (?)
-translate([0,0,(upper_lip_thickness*7/8)-upper_pushness_thickness]){
-linear_extrude(upper_pushness_thickness){
-translate([0,-upper_pusher_base-upper_lip_base,0]) {
-    square([base_width,upper_pusher_base]);
-}
-}
+    translate([ -2.5, -upper_lip_difference, base_depth / 2.5 ])
+    {
+        linear_extrude(upper_lip_thickness - 10 - (base_depth / 2.5))
+        {
+            square([ base_width + 5, upper_lip_difference ]);
+        }
+    }
 }
 
-// Upper Lip Hook (?)
-/*
-translate([0,0,(upper_lip_thickness-upper_can_hook_height)]){
-linear_extrude(upper_can_hook_height){
-translate([0,,0]) {
-    square([base_width,upper_can_hook_base]);
-}
-}
+// Upper Hook Push Lip
+translate([ 0, 0, (upper_lip_thickness * 7 / 8) - upper_pushness_thickness ])
+{
+    linear_extrude(upper_pushness_thickness)
+    {
+        translate([ 0, -upper_pusher_base - upper_lip_base, 0 ])
+        {
+            square([ base_width, upper_pusher_base ]);
+        }
+    }
 }
-*/
 
-translate([base_width,0,upper_lip_thickness-10]){
-rotate([0,-90,0]){
-pieSlice(90+25,upper_hook_radius,base_width);
-}
+// Upper Hook - Curved Hook
+translate([ base_width, 0, upper_lip_thickness - 10 ])
+{
+    rotate([ 0, -90, 0 ])
+    {
+        pieSlice(90 + 25, upper_hook_radius, base_width);
+    }
 }
 
 // Bottom Lip
 
-linear_extrude((bottom_lip_extrusion) + bottom_lip_thickness) {
-    translate([0,can_height,0]) {
-        square([base_width,bottom_lip_base]);
+linear_extrude((bottom_lip_extrusion) + bottom_lip_thickness)
+{
+    translate([ 0, can_height, 0 ])
+    {
+        square([ base_width, bottom_lip_base ]);
     }
 }
 
-translate([0,can_height-bottom_lip_height,(bottom_lip_extrusion)]) {
-    linear_extrude(bottom_lip_thickness){
-    square([base_width,bottom_lip_height]);
+translate([ 0, can_height - bottom_lip_height, (bottom_lip_extrusion) ])
+{
+    linear_extrude(bottom_lip_thickness)
+    {
+        square([ base_width, bottom_lip_height ]);
     }
-}
-/*
-translate([10,0,30]){
-rotate([360-90,45,0]){
-pieSlice(90, 30, 30);
-}
-}\*/
+}
\ No newline at end of file