diff options
| -rw-r--r-- | MTBCanHolder/12ozCanHolder.scad | 216 |
1 files changed, 113 insertions, 103 deletions
diff --git a/MTBCanHolder/12ozCanHolder.scad b/MTBCanHolder/12ozCanHolder.scad index 7cffd09..08f64a7 100644 --- a/MTBCanHolder/12ozCanHolder.scad +++ b/MTBCanHolder/12ozCanHolder.scad @@ -1,152 +1,162 @@ -$fn=100; +$fn = 100; /* Can holder MTB -Tested w/ +Tested w/ Giant Talon 2 (2022) and Marin Drift Zone 1 Infill: 40% */ /* -Normal 12oz can: 122 + +Type: can_height_offset / base_width / base_depth_offset + +Normal 12oz can: 122 / 20 / 0 Keystone 12oz: 133 Yerba Mate: 15.5 oz -Red Bull: 8.4oz: 136 +Red Bull: 8.4oz: 136 / 15 / -6.5 */ -can_height=136 + 8; // 12.cm -base_width=15; // 2cm -base_depth=10; // 1cm + +can_height_offset = 122; +base_width = 20; +base_depth_offset = 0; // For Non-12oz Cans + +can_height = can_height_offset + 8; // 12.cm +base_depth = 10; // 1cm screw_small_depth = 3; screw_thread_diameter = 9; -bolt_head_diameter=12; //6mm for M5 bolt -dist_between_holes=55; // 2.14inch / 64mm -hole_offset=25; // 2cm from origin -bottom_lip_height=4.5; // 4.5mm 2cm (1cm + xyz) -bottom_lip_thickness=5; // 5mm -bottom_lip_base=5; // 10mm -bottom_lip_extrusion=12.5 + base_depth; // 10.5mm -upper_lip_base=5; -upper_lip_thickness=23 + base_depth; // height basically -upper_pushness_thickness=4; -upper_pusher_base=15; -upper_can_hook_height=10; -upper_can_hook_base=5; -upper_can_hook_width=5; -upper_hook_radius=10; -upper_lip_difference=2.50; +bolt_head_diameter = 12; // 6mm for M5 bolt +dist_between_holes = 55; // 2.14inch / 64mm +hole_offset = 25; // 2cm from origin +bottom_lip_height = 4.5; // 4.5mm 2cm (1cm + xyz) +bottom_lip_thickness = 5; // 5mm +bottom_lip_base = 5; // 10mm +bottom_lip_extrusion = 12.5 + base_depth - 6.5; // 10.5mm +upper_lip_base = 5; +upper_lip_thickness = 23 + base_depth - 6.5; // height basically +upper_pushness_thickness = 4; +upper_pusher_base = 15; +upper_can_hook_height = 10; +upper_can_hook_base = 5; +upper_can_hook_width = 5; +upper_hook_radius = 10; +upper_lip_difference = 2.50; /* translate([-20,120,base_depth-2]) { - rotate([64,0,20]){ - color([1,0,0]) { - import("soda_can.stl"); } } - } */ - -// Distance from tip to base should 7.5mm -// Distance from tip to left face 6 mm - -module pieSlice(a, r, h){ - // a:angle, r:radius, h:height - rotate_extrude(angle=a) square([r,h]); -} - -linear_extrude(base_depth) { - difference() { - difference(){ - square([base_width, can_height]); - translate([base_width/2,hole_offset,0]){ - circle(d=bolt_head_diameter); - translate([0,(bolt_head_diameter)+dist_between_holes,0]) { - circle(d=bolt_head_diameter); +module +pieSlice(a, r, h) +{ + // a:angle, r:radius, h:height + rotate_extrude(angle = a) square([ r, h ]); +} + +// Base w/ Screw Holes +linear_extrude(base_depth) +{ + difference() + { + difference() + { + square([ base_width, can_height ]); + translate([ base_width / 2, hole_offset, 0 ]) + { + circle(d = bolt_head_diameter); + translate([ 0, (bolt_head_diameter) + dist_between_holes, 0 ]) + { + circle(d = bolt_head_diameter); } } } } } - -linear_extrude(screw_small_depth) { - translate([base_width/2,hole_offset,0]){ - difference() { - circle(d=bolt_head_diameter); - circle(d=screw_thread_diameter); - } - translate([0,(bolt_head_diameter)+dist_between_holes,0]) { - difference() { - circle(d=bolt_head_diameter); - circle(d=screw_thread_diameter); - } - } +// Screw Hole Padding +linear_extrude(screw_small_depth) +{ + translate([ base_width / 2, hole_offset, 0 ]) + { + difference() + { + circle(d = bolt_head_diameter); + circle(d = screw_thread_diameter); + } + translate([ 0, (bolt_head_diameter) + dist_between_holes, 0 ]) + { + difference() + { + circle(d = bolt_head_diameter); + circle(d = screw_thread_diameter); } + } + } } -// Upper Lip -difference(){ -linear_extrude(upper_lip_thickness){ -translate([0,-upper_lip_base,0]) { - square([base_width,upper_lip_base]); -} -} - -translate([-2.5,-upper_lip_difference,base_depth/2.5]) { - linear_extrude(upper_lip_thickness-10-(base_depth/2.5)){ - square([base_width+5,upper_lip_difference]); +// Upper Hook +difference() +{ + linear_extrude(upper_lip_thickness) + { + translate([ 0, -upper_lip_base, 0 ]) + { + square([ base_width, upper_lip_base ]); + } } -} -} -// Upper Lip Pusher (?) -translate([0,0,(upper_lip_thickness*7/8)-upper_pushness_thickness]){ -linear_extrude(upper_pushness_thickness){ -translate([0,-upper_pusher_base-upper_lip_base,0]) { - square([base_width,upper_pusher_base]); -} -} + translate([ -2.5, -upper_lip_difference, base_depth / 2.5 ]) + { + linear_extrude(upper_lip_thickness - 10 - (base_depth / 2.5)) + { + square([ base_width + 5, upper_lip_difference ]); + } + } } -// Upper Lip Hook (?) -/* -translate([0,0,(upper_lip_thickness-upper_can_hook_height)]){ -linear_extrude(upper_can_hook_height){ -translate([0,,0]) { - square([base_width,upper_can_hook_base]); -} -} +// Upper Hook Push Lip +translate([ 0, 0, (upper_lip_thickness * 7 / 8) - upper_pushness_thickness ]) +{ + linear_extrude(upper_pushness_thickness) + { + translate([ 0, -upper_pusher_base - upper_lip_base, 0 ]) + { + square([ base_width, upper_pusher_base ]); + } + } } -*/ -translate([base_width,0,upper_lip_thickness-10]){ -rotate([0,-90,0]){ -pieSlice(90+25,upper_hook_radius,base_width); -} +// Upper Hook - Curved Hook +translate([ base_width, 0, upper_lip_thickness - 10 ]) +{ + rotate([ 0, -90, 0 ]) + { + pieSlice(90 + 25, upper_hook_radius, base_width); + } } // Bottom Lip -linear_extrude((bottom_lip_extrusion) + bottom_lip_thickness) { - translate([0,can_height,0]) { - square([base_width,bottom_lip_base]); +linear_extrude((bottom_lip_extrusion) + bottom_lip_thickness) +{ + translate([ 0, can_height, 0 ]) + { + square([ base_width, bottom_lip_base ]); } } -translate([0,can_height-bottom_lip_height,(bottom_lip_extrusion)]) { - linear_extrude(bottom_lip_thickness){ - square([base_width,bottom_lip_height]); +translate([ 0, can_height - bottom_lip_height, (bottom_lip_extrusion) ]) +{ + linear_extrude(bottom_lip_thickness) + { + square([ base_width, bottom_lip_height ]); } -} -/* -translate([10,0,30]){ -rotate([360-90,45,0]){ -pieSlice(90, 30, 30); -} -}\*/ +}
\ No newline at end of file |